No-slip No-chafe Thigh Highs

I turned my thigh-high leg warmers for Nora Valkyrie into tights, and I filmed it so you can do it too!

need...

  • thigh highs (or leggings, or boot covers, or another pair of tights, etc.)

  • dance tights (or leggings)

  • scissors

  • pins

  • preferably a serger. this might be possible using a stretch zigzag stitch on a regular machine.

also I apologize for the occasional terminology mix up, filmed this on the fly after work.

Tassel on Rope Trim

Here is a super sped up time lapse of how I put the tassels together for Ren.

Materials:

▶️ the rope you want to cap in tassels

▶️ existing tassels to destroy OR a skein or embroidery floss in a coordinating color

▶️ fabric glue (and preferably something to smooth it down, i used the other end of a seam ripper, just your finger is fine but messy)

▶️ scissors

Instructions:

I do use a lot of fabric glue and would recommend letting it fully dry between each step

1️⃣cut length of rope and seal off ends with fabric glue

2️⃣ take apart existing tassel OR grab a skein of embroidery floss in a matching color

3️⃣ split apart the rope and put half of the tassel through the opening, winding down till the bottom.

4️⃣ Use a little bit of glue to lay the strands so they cover the cut end of the rope

5️⃣ wind a thread around the threads just under where the rope ended. This creates the tassel. glue down for extra security.

6️⃣ trim the ends and done!

Watermelon Hammer

last minute before a little library con I decided to make Nora's watermelon hammer from the food fight.

watermelon-hammer-reference
 

here is how it went...

watermelon-1.PNG

• gather supplies 

 
watermelon-1.1.JPG

• cut a hole in one side at the middle of the paper towel tube
• insert over the end of the stick to forum a T support structure 

 
watermelon-1.2.JPG

• cut out a section of one foam ring to fit the rod
• slide all three rings on

 
watermelon-1.3.JPG

• insert the ends of the tube into each foam half-sphere 

 
watermelon-2.PNG

• duct tape together
• fill with expanding foam for extra stability

 
watermelon-3.JPG

• cover with painting tape, to smooth out the surface 

 
watermelon-4.JPG

• paint with mod podge or other similar glue to continue smoothing

 
watermelon-5.PNG

• paint base light green
• add dark green stripes with a sponge

 
watermelon-6.JPG

tahh-dahh!